This product listing is for the part 6ES7155-5BA00-0AB0, manufactured by Siemens, and is a IM 155-5 DP ST PROFIBUS DP slave interface module for SIMATIC ET 200MP, provides one PROFIBUS (RS‑485) port and supplies up to 12 ET 200MP I/O modules via the backplane bus..
This product is currently out of stock.
Returns are accepted within 30 days if the item(s) received are not what was ordered or are broken.
Part Specifications:
- Article number (MLFB/MPN): 6ES7155-5BA00-0AB0
- Product family / series: SIMATIC ET 200MP
- Module type: IM 155-5 DP ST (PROFIBUS DP slave interface)
- Supported bus / protocol: PROFIBUS DP (RS-485 physical layer)
- Number of PROFIBUS interfaces / ports: 1
- Max. I/O modules supported per rack: 12 count
- Backplane bus power fed (infeed): 14 W
- Power loss, typical: 4 W
- Supply voltage valid range (DC): 20.4 to 28.8 V
- Rated current consumption: 0.2 (at 24 V DC, without load) A
- Maximum current consumption: 1.2 (at 20.4 V DC, max. load) A
- Inrush current, max.: 4 A
- I²t: 0.09 A²·s
- From interface 5 V DC, max.: 80 mA
- Address space per station, max.: 244 (per input / output) byte
- Operating temperature (horizontal installation): 0 to 60 °C
- Operating temperature (vertical installation): 0 to 40 °C
- Storage temperature: -25 to 60 °C
- Installation altitude, max.: 5000 m
- Insulation test voltage (type test): 707 (type test) V DC
- Transmission rate, max.: 12 Mbps
- Dimensions - Width: 35 mm
- Dimensions - Height: 147 mm
- Dimensions - Depth: 129 mm
- Weight, approx.: 360 g
- PROFIBUS connector: 9-pin Sub-D (connector included in product package)
- Firmware / Hardware identifiers: Hardware version 01, Firmware V1.0.0 (as listed in device-specific specifications)
- Reverse polarity protection: Yes
- Short-circuit protection: Yes
- Mains/voltage failure stored energy time: 5 ms
*Image shown is a reference only, please refer to your part number.
Have a question about this product?
Specifications
Physical
Operating temperature (horizontal installation)
0 to 60 °C
Operating temperature (vertical installation)
0 to 40 °C
Storage temperature
-25 to 60 °C
Installation altitude, max.
5000 m
Weight, approx.
360 g
PROFIBUS connector
9-pin Sub-D (connector included in product package)
Technical
Article number (MLFB/MPN)
6ES7155-5BA00-0AB0
Product family / series
SIMATIC ET 200MP
Module type
IM 155-5 DP ST (PROFIBUS DP slave interface)
Supported bus / protocol
PROFIBUS DP (RS-485 physical layer)
Number of PROFIBUS interfaces / ports
1
Max. I/O modules supported per rack
12 count
Backplane bus power fed (infeed)
14 W
Power loss, typical
4 W
Supply voltage valid range (DC)
20.4 to 28.8 V
Rated current consumption
0.2 (at 24 V DC, without load) A
Maximum current consumption
1.2 (at 20.4 V DC, max. load) A
Inrush current, max.
4 A
I²t
0.09 A²·s
From interface 5 V DC, max.
80 mA
Address space per station, max.
244 (per input / output) byte
Insulation test voltage (type test)
707 (type test) V DC
Transmission rate, max.
12 Mbps
Firmware / Hardware identifiers
Hardware version 01, Firmware V1.0.0 (as listed in device-specific specifications)
Reverse polarity protection
Yes
Short-circuit protection
Yes
Mains/voltage failure stored energy time
5 ms
Dimensions
Dimensions - Width
35 mm
Dimensions - Height
147 mm
Dimensions - Depth
129 mm
FAQs
Are your stock levels accurate?
How do you ensure manufacturers are legitimate?
Why is your lead time so short?
What is your return policy?
People also viewed
Free domestic shipping on orders over $100!
Availability
All stock is new and certified authentic, shipping directly from a verified manufacturer.
Out of Stock
This product is currently sold out.
We accept Visa, Mastercard, American Express, and more! Taxes are calculated at checkout.
